Table of Contents
Advertisement
SBP 29 Installation Manual
Transmit Transducer cable
The following transducer cables are all supplied by Kongsberg Maritime with the
SBP 29 system.
Tx transducer cables
System beamwidth
3 degrees
6 degrees
12 degrees
All Tx cables are moulded to the Cable Connection Units.
Note
* CCU = Cable Connection Unit
The length of the cables are fixed. The cables can not be extended or shortened during
installation.
Cable specifications
• Cable length: 25 m
• Maximum outer diameter: 12.95 +/– 0.5 mm
• Minimum bending radius: 77.5 mm
• Connector: 25-pin D-Sub connector
86
Number of CCUs*
4
2
1
Number of cables from
CCUs* to Tx elements
8
4
2
451253/A
Advertisement
Table of Contents
