Table of Contents
Advertisement
OceanStor S2600 Storage System
Routine Maintenance
Parameter
Health Status
Running
Status
Physical Type
Logical Type
Model
Owning
RAID Group
Capacity
Running Time The parameter indicates the running time of the disk, and the unit is day.
Current
Working Rate
Temperature
Rotation
Speed
Associated
Disk
Serial Number The parameter indicates the serial number of the disk.
Firmware
Manufacturer
----End
Exception Handling
l
l
l
Issue 01 (2009-09-27)
Description
The parameter indicates the status of the functions and running specifications
of the disk.
The parameter indicates the running status of a disk. The status can be
Online, Offline, Reconstructing, Reconstructed, Copybacking, Pre-
copy, Free Hot-Spare disk, and Used Hot-Spare disk.
The parameter indicates the physical type of the disk: SAS, and SATA.
The parameter indicates the disk type. There are the following options:
Free Disk: It is the normal disk that is not used in the storage array.
l
Member Disk: It indicates the disk in a RAID group.
l
Free Hot-Spare Disk: It indicates the hot-spare disk that is not in use.
l
Used Hot-Spare Disk: It indicates the hot-spare disk in use.
l
The parameter indicates the disk model.
The parameter indicates the RAID group where a disk is added. When the
value of Logical Type is Member Disk, the parameter is valid.
The parameter indicates the disk capacity, and the unit is GB.
The parameter indicates the current working rate of the disk, and the unit is
Gbit/s。
The parameter indicates the temperature of the disk, and the unit is ℃.
The parameter indicates the rotation speed of the disk, and the unit is rpm.
The parameter indicates the faulty disk that uses the association disk to
perform reconstruction or copyback. When the value of Logical Type is
Used Hot-Spare Disk, the parameter is valid.
The parameter indicates the firmware version of the disk.
The parameter indicates the manufacturer of the disk.
If the running status of the disk is Offline, ensure that the disk is correctly inserted (If the
disk is on the disk enclosure, ensure that the cable is connected to the expander port.)
If the health status of the disk enclosure is Unknown, remove and insert the disk and check
the status again.
If the health status of the disk enclosure is Fault, see the
OceanStor S2600 Storage System Event Reference.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Routine Maintenance Guide of the ISM
"0x200190384 Disk
fault"in the
4-9
Advertisement
Table of Contents
