AMX MIO R-4 Operation/Reference Manual page 88

Programming the Mio R-4
List Box Commands (Cont.)
Data List Commands
^LDA
Adds a new row to an existing
data list. Primary data is
required.
^LDR
Removes a row from an
existing data list
^LDC
Clears all rows in a given list
82
Syntax:
SEND_COMMAND <DEV>,"'^LDA-<list
address>,<uniflag>,<primary data>,<data2>...'"
Variables:
• list address = address where data resides
• uniflag = indicates unicode; 0 - No unicode, 1 - Uses unicode
• primary data = the "key" data column. The information in this column provides
each row with its uniqueness.
• data2 = variable, column data information. The number of data fields is
limited only to the number of columns in the data list.
Example:
SEND_COMMAND Device,"'^LDA-1,0,Entry5,Meatloaf,Best
of,Anything for Love'"
Adds a text row to the data list located at address 1. The primary data is set as
Entry5. Meatloaf, Best of, and Anything for Love are all cells within the new
row.
Example (unicode):
SEND_COMMAND Device,"'^LDA-
1,1,0045006E0074007200790035,004D006500610074006C006F006
10061,00420065007300740020006F0066,0041006E0079007400680
069006E006700200066006F00720020004C006F00760065'"
Adds a unicode text row to the data list located at address 1. The primary data
is set as Entry5. Meatloaf, Best of, and Anything for Love are all cells within the
new row.
Syntax:
SEND_COMMAND <DEV>,"'^LDR-<list
address>,<uniflag>,<primary data>'"
Variables:
• list address = address where data resides
• uniflag = indicates unicode; 0 - No unicode, 1 - Uses unicode
• primary data = the "key" data column. The information in this column provides
each row with its uniqueness.
Example:
SEND_COMMAND Device,"'^LDR-1,0,Entry5'"
Removes the text row with primary data Entry5 from an existing data list at
address 1.
Syntax:
"'^LDC-<list address>'"
Variables:
• list address = address where data resides
Example:
SEND_COMMAND Device, "'^LDC-1'"
Clears all rows in data list located at address 1.
Mio Modero R-4