Table of Contents
Advertisement
Further settings
86
Main wash
If you select
altered:
Temperature
Final rinse temp.
-
/
Adjust the temperature for the selected block.
Holding time
-
Adjust the holding time for the selected block.
Select an option using the and arrow buttons and confirm your
selection with OK.
The setting value is entered in increments of 1. The possible range is
shown in the bottom line of the display.
Dispensing of process chemicals occurs at a default dispensing tem-
perature set at the factory. If process chemicals are to be dispensed
in this wash block, the lowest temperature that can be set will be the
dispensing temperature. It is not possible to set a lower value.
Use the (higher) and (lower) arrow buttons to set the value.
Press OK to save the setting.
Final rinse
or
, the following settings can be
Reset
Temperature
Holding time
- Quick Links:
- Machine Overview
Hide quick links:
Advertisement
Table of Contents
