Powder Cleaning Agents; Dispensing Powder Cleaning Agents - Miele PG 8063 Operating Instructions Manual

Adding and dispensing chemical agents
Powder
cleaning agents
Dispensing
powder cleaning
agents
54
Dispensing liquid cleaning agent using an external dispensing mod-
ule is pre-set ex-works.
It is not possible to dispense powder and liquid cleaning agent at
the same time. If you wish to dispense powder cleaning agent,
contact the Customer Service Department.
Do not fill the dispenser in the door with cleaning agent if dispens-
ing is performed using an external dispensing module.
 Take care not to inhale powder cleaning agents.
Swallowing process chemicals can cause chemical burns in the
mouth and throat or lead to asphyxiation.
Add powder cleaning agent to the dispenser with the  symbol

before starting the programme. Do not dispense powder cleaning
Rinsing
agent in the
Press the yellow button on the dispenser with the  symbol.

The flap will spring open. The flap is always open at the end of a pro-
gramme cycle.
The level markers in the powder container with the door in the hori-
zontal position equate to the amount dispensed in millilitres (ml). The
max. capacity is approx. 60 ml of cleaning agent.
The amount in ml equates to approx. the amount normally recom-
mended in grams (g) for proprietary powder cleaning agents. Powder
density can affect this amount.
Dispensing example:
Approx. 10.5 l of water are taken into the machine for the main
wash. With a cleaning agent concentration of approx. 3 g/l, you will
need approx. 30 g of cleaning agent. Please observe manufacturer's
recommendations, which may vary!
Drain
and programmes.