Miele PG 8063 Operating Instructions Manual page 120

Plumbing
IMPORTANT
120
UK, Australia and New Zealand.
This appliance must be installed according to AS/NZS 3500.1 (Aus-
tralia and New Zealand) or in accordance with WRAS regulations
(UK). This appliance has been supplied with a separate backflow
prevention device.
This machine must be connected to the potable water supply via the
non-return valve (check valve) supplied with the machine.
Before making plumbing connections, ensure the appliance is discon-
nected from the mains power supply (switch off or unplug from the
power supply).
Turn off the mains water tap.

Place the seals on both sides of the non-return valve.

Connect the female end of the non-return valve to the mains water

tap (3/4" thread).
Connect the filter to the male end of the non-return valve (3/4"

thread).
Connect the inlet hose to the filter.

Ensure that all connections are screwed into position correctly. The
connection point is subject to mains water pressure.
Turn on the tap slowly and check for leaks.

Correct the position of the seal and union if necessary.