Miele PG 8063 Operating Instructions Manual page 14

Cleaning machine for air regulators and breathing masks
Table of Contents

Advertisement

Warning and Safety instructions
14
Label cleaning machines which have been taken out of operation
and secure them against being switched on again without authorisa-
tion. The cleaning machine may only be put back into operation once
it has been successfully repaired by the Miele Customer Service De-
partment or by an appropriately qualified specialist.
Personnel operating the machine should be trained regularly. Un-
trained personnel must not be allowed access to the machine or its
controls.
Only use process chemicals which have been approved by their
manufacturer for the relevant application. The manufacturer of the
process chemicals is liable for any negative influences on the material
of the load and the machine.
Take care when handling chemical agents. These may contain irrit-
ant, corrosive or toxic ingredients.
Please observe the chemical agent manufacturer's safety instructions
and safety data sheets.
Wear protective gloves and goggles.
The machine is designed for operation with water and recommen-
ded additive chemical agents only. Organic solvents and flammable
liquid agents must not be used in it.
This could cause an explosion, damage rubber or plastic components
in the machine and cause liquids to leak out of it.
The water in the cabinet must not be used as drinking water.
Take care not to inhale powder agents. Chemical agents can cause
chemical burns in the mouth and throat or lead to asphyxiation.
Do not lift the machine by protruding parts such as the control
panel or the opened service flap as these could be damaged or torn
off.
Do not sit or lean on the opened door. This could cause the ma-
chine to tip up and be damaged or cause an injury.
When using this machine in the higher temperature ranges, be es-
pecially careful not to scald or burn yourself or come into contact with
irritant substances when opening the door. Where disinfecting agents
are used there is a danger of inhaling toxic fumes.
Should personnel accidentally come into contact with toxic va-
pours or chemical agents, follow the emergency instructions given in
the manufacturer's safety data sheets.
Allow baskets, modules, inserts and the load to cool down before
removing them. Empty any remaining water into the wash cabinet or
an on-site slops basin before removing items.
Never clean the machine or near vicinity with a water hose or a
pressure washer.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents