Breathing masks
Carrier frames for
compressed air
units
Remove the breathing masks and empty any remaining water into
the wash cabinet or an on-site slops basin before removing items.
Follow the breathing mask manufacturer's instructions regarding
drying, assembly and replacing wear parts.
Before using the breathing masks again following reprocessing, a
function check must be carried out in line with the manufacturer's
instructions.
Remove the carrier frame and empty any remaining water into the
wash cabinet or an on-site slops basin before removing items.
Following the carrier frame manufacturer's instructions regarding
drying and maintenance.
A function check on any pneumatic or electronic components,
such as pressure indicators, must be carried out in line with the
manufacturer's instructions before the carrier frame can be used
again after reprocessing.
Areas of application
47