Table of Contents
Advertisement
Further settings
Change code
74
The PIN code consists of a four digit number and is set by the user.
Each digit can be programmed freely between 0 and 9.
When a new PIN code is entered, the old PIN code is overwrit-
ten and is permanently deleted. Therefore it cannot be reinstated.
If a PIN code is lost, a new code must be issued by the Miele Cus-
tomer Service Department.
Open the
Further settings
the button and then switch it on again with the button whilst
keeping the button held in.
Open the menu as follows:
Further settings
Code
Change code
Use the arrow buttons (higher) and (lower) to enter the relevant
digits.
Confirm each digit individually with the OK button.
When the OK button is pressed, the display jumps automatically to
the next input position. You cannot go back to the previous entry. If a
mistake is made, the process must be cancelled using the button
and repeated. Entered digits are replaced by a
The code is saved to memory once you have confirmed the last digit.
menu by switching the machine off with
Code
*
symbol.
- Quick Links:
- Machine Overview
Hide quick links:
Advertisement
Table of Contents
