Siemens SIMATIC ET 200AL Manual page 45

Technical specifications
6.1 Technical specifications
Article number
Interference voltage suppression for f = n x (f1
+/- 0.5 %), f1 = interference frequency
• Series mode interference (peak value of
interference < rated value of input range),
min.
Interrupts/diagnostics/status information
Alarms
• Diagnostic alarm
• Limit value alarm
Diagnostic messages
• Wire-break
• Overflow/underflow
Diagnostics indication LED
• Channel status display
• for module diagnostics
Potential separation
between the load voltages
Potential separation channels
• between the channels
• between the channels and backplane bus
• between the channels and the power sup-
ply of the electronics
Isolation
Isolation tested with
Degree and class of protection
IP degree of protection
Standards, approvals, certificates
Suitable for applications according to AMS
2750
Suitable for applications according to CQI-9
Ambient conditions
Ambient temperature during operation
• min.
• max.
Connection method
Design of electrical connection for the inputs
and outputs
Design of electrical connection for supply volt-
age
ET-Connection
• ET-Connection
44
6ES7144-5KD50-0BA0
40 dB
Yes; Parameterizable
Yes; Parameterizable
Yes; Not for ±80 mV
Yes
Yes; green LED
Yes; green/red LED
Yes
No
Yes
No
707 V DC (type test)
IP65/67
Yes; Declaration of Conformity, see online support
entry 109757262
Yes; Based on AMS 2750 E
-30 °C
55 °C
M12, 5-pole
M8, 4-pole
M8, 4-pin, shielded
Analog input module AI 4xRTD/TC 4xM12 (6ES7144-5KD50-0BA0)
Equipment Manual, 08/2020, A5E48753535-AA