Zamel EXTA PBM-02 Instruction Manual

BISTABLE RELAY PBM-02
DESCRIPTION
The bistable relay PBM-02 is used to
control lighting or other devices by means
of monomodular pushbuttons connected
in a parallel way. Pushing any button cau-
ses switching on or switching off the de-
vices connected to output terminals. The
controlling impulse can be L or N line sig-
nal. The Set and Rest control inputs allow
central control of a relay group. Using the
inner relay memory allows to remember
its current mode in cases of power supply
loss.
FEATURES
‫ی‬ Bistable lighting control,
‫ی‬ input rated indicator – LED green,
‫ی‬ relay mode indicator – LED red,
‫ی‬ central control function,
‫ی‬ relay mode memory,
‫ی‬ system releasing from the L or N
cable,
‫ی‬ cooperation with monostable pus-
hbuttons equipped with illumination
lamps,
‫ی‬ TEST function,
‫ی‬ double-wire controll installation,
‫ی‬ voltage relay output - one NO (norma
closed) contact max 16 A capacity.
The device is desig-
ned for one-phase in-
stallation and must be
installed in accordance
with standards valid in
CAUTION
a particular country.
The device should be
connected according to the details inclu-
ded in this operating manual. Installation,
connection and control should be carried
out by a qualified electrician staff, who act
in accordance with the service manual
and the device functions. Disassembling
of the device is equal with a loss of gua-
rantee and can cause electric shock. Be-
fore installation make sure the connec-
tion cables are not under voltage. The
cruciform head screwdriver 3,5 mm sho-
uld be used to instal the device.Improper
transport, storage, and use of the device
influence its wrong functioning. It is not
advisable to instal the device in the follo-
wing cases: if any device part is missing
or the device is damaged or deformed. In
case of improper functioning of the devi-
ce contact the producer.
Zakład Mechaniki i Elektroniki
ZAMEL sp.j.
J.W. Dzida, K. Łodzińska
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04
www.zamel.pl, e-mail: marketing@zamel.pl
TECHNICAL PARAMETERS
Input (supply) terminals : L, N
Input rated voltage: 230 V~
Input voltage tolerance: from -15 to +10 %
Nominal frequency: 50 / 60 Hz
Rated power consumption: 24 mA
Supply voltage control indicator: LED green
Release terminals: IN, IN, IN
Release control current: 930 µA
Central control terminals: Set, Reset
Power/relay supply indicator: LED red
Relay operating indicator: TEST button
Output relay parameters: 1NO - 16 A / 250 V AC1 4000 VA
Number of terminal clamps: 10
Section of connecting cables: from 0,2 to 2,50 mm
Ambient temperature range: from -20 to +45
Operating position: free
Protection degree: IP20 (PN-EN 60529)
Overvoltage category: II
Pollution degree: 2
Rated impulse withstand voltage: 1 kV (PN-EN 61000-4-5)
Dimensions (height / width / depth): monomodular (17,5 mm) 90x17,5x66 mm
Reference standards: PN-EN 60669-1; PN-EN 60669-2-1
APPEARANCE
Input supply terminals (L)
Supply voltage control indicator
Power/relay supply indicator
Central control terminals (S, R)
Output (load) relay
terminals (11, 11, 14)
INSTRUCTION MANUAL
PBM - 02
Mounting: TH35 rail (PN-EN 60715)
Protection class: II
Weight: 80 g
PN-EN 61000-4-2,3,4,5,6,11
2
C
o
Input supply terminals (N)
Release terminals
(IN, IN, IN)
ver. 0.4.2 _ 2006.06.26_08:00