Presser Foot Tape Guide - Bernina L 460 Workbook

Overlocker

Hide thumbs Also See for L 460:

Instruction manual (64 pages)

Table Of Contents

Table of Contents

BERNINA

Overlocker Workbook 1

Fabric:

Two pieces cotton interlock fabric, 3" x 6" each and

Narrow twill tape, 8"

Needle:

80/12 Universal

Thread:

4 cones of overlocker thread (blue, red, green, yel-

low)

Presser Foot:

Standard

Thread the overlocker for a 4-thread overlock stitch using thread col-

ors to match the color-coded threading path on the overlocker. Ad-

just all thread tension settings as indicated below.

Locate the tape guide on the presser foot.

Using the small screwdriver from the accessory pouch, loosen the

fixing screw and slide the tape guide all the way to the left. Snug

the screw.

Slip the twill tape or ribbon into the slot on the presser foot and

position it under the foot, pulling it to the back.

Lower the presser foot and lower the needles into the tape or ribbon.

Loosen the fixing screw and adjust the tape guide to the width of the

tape or ribbon. Retighten the screw.

Place the fabric pieces right sides together. Slip the fabric under the

foot and seam along the 6" side, catching the tape or ribbon in the

stitched edge.

Remove the fabric from under the presser foot and examine the

seam. It will not stretch; the tape or ribbon has stabilized the seam.

fixing screw

05/14/2020