Presser Foot Tape Guide - Bernina 700D Owner's Workbook

M
ASTERING
Y
OUR
BERNINA
®
Fabric:
Needle:
Thread:
Presser Foot:
• Owner's manual pg.___
• Thread the serger for a 4-thread overlock stitch.
• Set all thread tension levers between 3-5 (normal).
• Locate the tape guide on the presser foot.
• Using the small screwdriver from the accessory pouch,
loosen the fixing screw and slide the tape guide all the
way to the left. Snug the screw.
• Slip the twill tape or ribbon into the slot on the presser foot.
• Lower the presser foot and lower the needles into the tape
or ribbon.
• Loosen the fixing screw and adjust the tape guide to the
width of the tape or ribbon. Retighten the screw.
• Seam the jersey together along the 6" side, catching the
tape or ribbon.
• Remove the fabric from under the presser foot and
examine the seam. It will not stretch. The tape or ribbon
has stabilized the seam.
• Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
SEAMING KNIT FABRICS

Presser Foot Tape Guide

2 pieces cotton single knit jersey,
2" x 6" (stretch across the 2" side)
8" of ¼" twill tape or ribbon
11/75 Stretch or Ballpoint
2 cones of serger thread (needles)
2 cones of Woolly Nylon (loopers)
Standard Foot with Tape Guide (optional)
1/04/02
®
BERNINA
®
700D/800DL
700D/800DL/23