Table of Contents
Advertisement
BERNINA
Overlocker Workbook 1
Fabric:
Firm fabric, 6" x 6"
Needle:
80/12 Universal
Thread:
3 cones of overlocker thread (blue, red, green)
Presser Foot:
Standard
Stitch:
3-thread overlock (narrow)
Using the small screwdriver and brush/needle insertion tool, remove
the left needle. Snug the needle set screw after removing the needle.
Thread the overlocker for a narrow 3-thread overlock stitch using
thread colors to match the color-coded threading path on the overlock-
er. Adjust all thread tension settings for a balanced stitch as indicated
below.
Inside Corner
This technique works well for continuous plackets on sleeves and
back neck openings.
• Cut an inside corner into the fabric.
• Snip into the corner about ¼" (the width of the stitching).
• Stitch until the knife reaches the end of the cut.
• Use the handwheel to lower the needle into the fabric.
• Lift the presser foot and straighten the corner towards you.
• Lower the presser foot; continue stitching.
.
05/14/2020
Inside Corner
Suggested Settings
Upper Looper
Lower Looper
Left Needle
Right Needle
Stitch Length
Cutting Width
Differential Feed
L 460/L 450
3-5
3-5
3-5
3-5
2.5
6
1
16
Advertisement
Table of Contents
