Image Update; Updating The Panel Image Using Usb Or Sd-Card; Preferred Way - Beijer Electronics Image Manual X2 base v2 User Manual

4

Image Update

The operator panel comes pre-loaded on delivery with an image.
iX Runtime can be updated via Ethernet using a PC.
The Image Loader utility is used to create Image Loader SD-cards and USB-sticks
or to transfer a panel image to an operator panel over Ethernet.
The IML can be updated in the following ways:
Update method
Ethernet
USB
SD
Recovery SD Card
If you want a complete system update, choose Make Recovery SD Card. The
iX Developer will then be set to default settings, except for touch.
4.1 Updating the Panel Image using USB
or SD-Card
4.1.1
Using a USB flash drive or SD-card to update the image in an operator panel is the
preferred method of updating the panel. This makes it possible to upgrade the
panel image without the use of a PC.
Beijer Electronics, MAEN352
iX Developer project remains
X
X
X
-

Preferred Way

Image Update
IP adress remains
X
X
X
-
14