AGA
Six Four series (Ceramic Hob)
AGA
Six Four series (Ceramic Hob)
---
---
assembly instructions for modular models
assembly instructions for modular models
Top right
Bring in and terminate incoming mains cable. For 3 phase supples, remove the live
links L1-L2 & L2-L3, as shown in diagram on page 4
Plug in the two multi-way plugs. They are
biased and will only fit into their correct
sockets.
Refit rear panel.
An electrical safety test must now be
performed.
Confirm that the household electrical
supply is of correct polarity.
Select 500v on a megger tester and
connect the leads on to the appliance
connections.
Depress the test button and record
results.Meter should read infinity.
Any inconclusive results should be
investigated and rectified.
7
Top right