AGA Six Four Series Assembly Instructions Manual page 5

AGA Six Four series (Ceramic Hob)
AGA Six Four series (Ceramic Hob)
---
---
assembly instructions for modular models
assembly instructions for modular models
Remove rear panel (7 screws)
Lift front-plate onto chassis, engaging the two centre screws into the slotted holes.
Ensure that the front-plate drops down ino the baseplate and that the apertures line up
to the ovens. The seals should be slightly compressed.
From the rear of the Front plate. Remove
four outer screws but leave the two centre
ones loosely in place.
Using an extended length screwdriver passing
between the ovens, tighten the centre two screws,
then evenly around the outer ones, ensuring that
the ovens seal against front-plate.
5