Switching Off Dhw Heating - Viessmann VITOTRONIC 100 Operating Instructions Manual

DHW heating
Setting DHW temperature
Set the "Set DHW temperature" for the DHW cylin-
der.
Factory setting: 50 °C
Tap the following on-screen buttons:
1. If required, for the home screen
2. for the "Main menu"
Setting "Operating program" for DHW heating
Enable the "Operating program" for DHW heating.
The setting is required only where the
mode" "Operating program" is set.
Tap the following on-screen buttons:
1. If required, for the home screen
2. for "Operating program"

Switching off DHW heating

Deactivate DHW heating.
Tap the following on-screen buttons:
1. If required, for the home screen
2. for the main menu
3. "DHW" for DHW heating settings
4. "DHW set temperature"
5. for 10 °C
6. to confirm
16
3.
4.
5. /
6.
3.
"Standby or
4.
For information on the operating programs, see
page 13
"DHW" for DHW heating settings
"DHW set temperature"
for the required value
to confirm
"Only DHW"
"Heating and DHW"
to confirm