ABB ZEE600 Operation Manual page 56

Section 3
Operating the system
50
The user level can be edited for each group.
7. Under Message Control, activate the user for message control services.
With message control, alarms and information messages can be automatically
sent and acknowledged via selected means. The message sending is triggered
with a function that can be linked to an event. The status of this transmission is
logged in the chronological event list. Message control enables secure access to
current power network data anytime and anywhere making it easier to respond
quickly to faults or incidents.
7.1. Select the User check box if the user is used by the module Message
Control.
7.2. In the Telephone box, enter the number of the user's voice-compatible
telephone device.
This number is used for text to speech.
Use numbers only in addition to the permitted characters. The prefix + can
be used as an abbreviation for 00 of the international area code and the
following separators are permitted in AD user administration: minus (-),
slash (/) and space. In the communication between AD and Message
Control, separators are ignored as soon as the data from the AD is mapped
to a zenon object.
7.3. In the Cell phone box, enter the user's cell phone number.
This number is used for messages via GSM and SMS (text messages).
Use numbers only in addition to the permitted characters. The prefix + can
be used as an abbreviation for 00 of the international area code and the
following separators are permitted in AD user administration: minus (-),
slash (/) and space. In the communication between AD and Message
Control, separators are ignored as soon as the data from the AD is mapped
to a zenon object.
7.4. In the Mail box, enter the user's e-mail address.
7.5. Click by the Substitute person box, to select a substitute person if the
user is not reached or they do not accept the message.
Only users who have been activated as Message Control users are
available for selection.
7.6. In the PIN code box, enter a four-digit PIN code (0000...9999) that the user
must use to confirm the receipt of the message.
7.7. In the NA code box, enter a four-digit PIN code (0000...9999) that the user
must use to reject the receipt of the message (not available).
After rejection, the message is sent to the next user in the list. If there is no
other user entered in the list, the message is entered as "not successfully
acknowledged". The function assigned to this is executed. In addition, a
"rejected by" CEL entry is created in each case.
8. Click Ok.
2NGA000149 A
ABB ZEE600
Operation Manual