ABB ZEE600 Operation Manual page 55

2NGA000149 A
ABB ZEE600
Operation Manual
• Select a user and click edit.
• Click new to create a new user.
• Select a user and click Delete.
If users are edited or created, the User Details dialog box opens.
4. Under User, define the user details.
4.1. In the User name box, use a maximum of 20 characters to enter a unique
user name that is used for logging in to the system.
If the user already exists, an error message appears.
4.2. In the Complete name box, enter the user's full name.
4.3. In the User type list, define the user right level.
• User
• Power user
• Administrator
4.4. Select the Active check box if the user should be active and able to log in
to the system.
4.5. Clear the Locked check box if the user has been locked in Runtime and is
unable to log in to the system, for example, after three failed login
attempts.
4.6. In the Login profile list, select the login profile for the filter settings.
GUID-DFECCC63-F705-4981-93E7-2888D106DB9C V1 EN
Figure 40: Defining user details
5. Under Change password, manage the passwords.
5.1. In the Old password box, enter the old password to be able to change the
existing password.
This is only used if the user wants to change the password. If an
administrator changes this password, the user needs to change the
password at first login.
5.2. In the New password box, enter the new password for the user.
5.3. In the Confirm password box, enter the new password again.
6. Under User Groups, click
Operating the system
or to select or remove the user's user groups.
Section 3
49