Defining New Event Filters - ABB ZEE600 Operation Manual

2NGA000149 A
3.10.3.1
ABB ZEE600
Operation Manual

Defining new event filters

The filter dialog box has several settings that allow the event list to be filtered.
1. In Chronological Event List, click Filter to open the filter dialog box.
GUID-DD39E501-1F1C-4746-A69F-3A6BF97A4794 V1 EN
Figure 37: Opening the filter dialog box
2. Under Variable filter, define filter settings on the variable level.
Table 14: Variable filter
Item
Variable name
Identification
Case sensitivity
Show list without refresh
Non-acknowledged alarms only
Current alarms only
Only cleared alarms
Comment required
Ring buffer
Historic data
Maximum number
3. Under Text filter, define the text filter properties.
Operating the system
Description
Filters by variable name
Filters by variable identification
Capitalization must be noted.
Event list does not refresh.
Displays only unacknowledged alarms
Displays current alarms only
Displays cleared alarms only
Displays only alarms that require a comment
when acknowledged
Data comes from the ring buffer
Data comes from an archive
Maximum number of historical alarms to be
displayed
0: displays all
Section 3
45