Technical Meter Specifications; Electrical And Safety Standards - Pogo Press. Test. GO Owner's Manual

Technical
Meter Specifications
Display: LCD
Automatic power-off: 30 seconds after test result
Backlight off: 30 seconds
Power supply: Two AAA alkaline batteries (do not use rechargeable)
Battery life: Approximately 500 tests
Altitude: Up to 10,000 feet
Size: 4" x 2" x 1.5"
Weight: 3.4 ounces with batteries
Blood source: Whole blood
Sample size: 250 nanoliters (.25 microliters)
Assay Method: Glucose oxidase
Calibration: Plasma calibrated
Result range: 20–500 mg/dL
Unit of measure: mg/dL
Hematocrit range: 20% – 60%
Operating temperature: 50°F – 104°F (blood glucose & Control Solution)
Storage temperature: 40°F – 86°F
Storage & Operating 10% – 90% (non-condensing)
Memory capacity: 500 test results
Test time: 4-second countdown
Customer Service 1-855-IMI-POGO (464-7646) • www.presspogo.com
78
Bluetooth technology:
®
Frequency range: 2.4-2.485 GHz
Operating Range Distance:
minimum 26.25 feet (unobstructed)

Electrical and Safety Standards

The POGO meter complies with the applicable standards for
Electromagnetic Compatibility; however, it is not recommended that it
be used in the presence of strong electromagnetic fields.
Since your POGO meter is an electronic device, you should follow all
local environmental regulations for disposal.
Bluetooth Wireless Technology
®
Your POGO Automatic meter uses Bluetooth low energy technology to
communicate and transfer information optionally to your smartphone.
Bluetooth wireless technology is a form of radio frequency (RF)
technology that operates in the unlicensed industrial, scientific
and medical band at 2.4 to 2.485 GHz. The RF channel utilized for
communication between the meter and other devices, such as a
smartphone, is not an open channel. Your meter complies with United
States Federal Communication Commission (FCC) standards. This
meter has been tested and found to comply with the limits of a Class B
digital device, pursuant to FCC Part 15 Rules. Operation of the device
is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Compliance with these guidelines means that under normal, daily
circumstances, the device should not affect the operation of other
devices. In addition, the device should operate normally in the presence
of other devices. In the event there is interference from another device,
the following measures are recommended:
• Increase the distance between the meter and that device.
• Turn off the interfering device.
• In addition, you can turn off Bluetooth wireless technology
on the meter.
Customer Service 1-855-IMI-POGO (464-7646) • www.presspogo.com
Operating Channels:
40 channels
Security Encryption:
128-bit AES
(Advanced Encryption Standard)
79