Cleaning Meter - Pogo Press. Test. GO Owner's Manual

Cleaning Meter AFTER EVERY
Clean ALL debris from external
meter surfaces
CARTRIDGE or WEEKLY
(whichever comes first)
Buttons
It is important to thoroughly follow all
instructions. First, CLEAN your meter to
remove any debris. Use as many Clorox
Germicidal Wipes as needed to clean
ALL meter surfaces.
NOTE:
Test platform should
liquid from wipes before use to prevent
be cleaned first (See
page 64)
damage or meter malfunction.
• Clean meter exterior — Wipe front, back,
sides and buttons of meter case.
• Clean meter interior — Thoroughly
wipe all interior walls and corners
inside cartridge area, and surfaces
Optics
of cartridge door.
lens
• Clean meter parts until all visible soil
has been removed. Check battery
area to look for visible soil and clean if
necessary.
Thoroughly clean meter
interior
• Avoid getting dust, dirt, water or
excess liquid inside your meter or test
cartridges. Be careful to avoid getting
liquid in USB port, on batteries, or
battery contacts.
Customer Service 1-855-IMI-POGO (464-7646) • www.presspogo.com
Be sure to squeeze excess
66
Avoid liquid in USB port
WARNING: All POGO testing supplies are considered
biohazardous and can potentially transmit infectious diseases,
even after you have performed cleaning and disinfection. Wash
hands with soap and water immediately after use.
67
Customer Service 1-855-IMI-POGO (464-7646) • www.presspogo.com
DO NOT SOAK
METER IN WATER.