Storage And Handling - Pogo Press. Test. GO Owner's Manual

• Check that batteries are installed
properly and meter power works by
pressing the
of meter.
• Replace the battery door by aligning
the tab on the bottom of the battery
door with the slot on the meter back
and slide downward to lock into place.
Replace Battery Door
• When cleaning and disinfecting, take
care not to get liquid into battery
compartment.
NOTE: Be sure to set the correct time and date on your meter
before testing (see Setting Up Your Meter on page 55).
Customer Service 1-855-IMI-POGO (464-7646) • www.presspogo.com
M
button on the side
72

Storage and Handling

Avoid excess liquid
• Store POGO at room temperature
between 40°F – 86°F and within a
relative humidity range of 10%– 90%
(non-condensing).
• For best results, use POGO between
50°F – 104°F (operating temperature).
• If the temperature icon appears on your
POGO Meter screen, allow meter and
cartridges to adjust to the operating
temperature range before testing.
• Use POGO System in a relative humidity
range of 10%– 90% (non-condensing).
• Meter temperature is out of range
Cold Hot
Out of temperature
range symbols
Customer Service 1-855-IMI-POGO (464-7646) • www.presspogo.com
73