How Do Your Meter Results Compare To Lab Results; Memory - Pogo Press. Test. GO Owner's Manual

How Do Your Meter Results Compare To Lab Results?

For easy comparison, the results from the POGO Automatic
Meter and the laboratory test results are both expressed in
plasma-equivalent units.
If you wish to compare your meter result with the lab result,
you must be fasting for at least eight hours.
• Take your meter to the lab when you get your blood drawn
for a fasting glucose test.
• Test your blood glucose from your finger using your POGO
Meter within 10 – 15 minutes of getting your blood drawn
from your arm.
• Keep in mind that the lab uses a different test methodology
than the meter.
• Ask your healthcare professional for guidance when comparing
your lab result with your POGO Meter result.
Customer Service 1-855-IMI-POGO (464-7646) • www.presspogo.com
48

Memory

Recalling Results from Memory
In memory mode, you can view the last
500 test results, as well as result averages.
M button
The symbol
Access memory
viewing results from memory. The symbol
and set-up menu mode
+
indicates you are viewing result
-
averages.
IMPORTANT:
to enter Memory Mode. Do not press the
power button to access memory. This
will turn on meter and open a new test.
Viewing Test Results in Memory
Press
M
• To enter memory mode, press and
Scroll buttons
release the
Move back and forth
above). Do not hold down, as meter will
through results in
go to set-up mode.
memory
• The most recent result appears with time
and date. If the result was marked as
pre- or post-meal, the corresponding
8:15 AM
2/10/2019
symbol appears with the result.
98
• Use the
through the logbook view.
mg/dL
Memory Mode
Most Recent Result
Customer Service 1-855-IMI-POGO (464-7646) • www.presspogo.com
appears indicating you are
Meter must be turned off
Scroll
View Results
& Logbook
M
button (see diagram
scroll buttons to move
49