Add More Blood Feature (Only If Needed) - Pogo Press. Test. GO Owner's Manual

Add More Blood Feature
(only if needed)
• If meter does not get enough blood, these pictures will appear.
• You have 90 seconds to add more blood into the cartridge to
complete test. At 60 seconds, the meter will start counting
down to 0 as an alert.
• During this time, you will not be re-lanced.
• REMOVE FINGER from test port and gently squeeze to
get more blood.
For best results, use approx.
Use rounded blood droplet
Customer Service 1-855-IMI-POGO (464-7646) • www.presspogo.com
0.5 microliters of blood
Blood Chart (microliters)
1 .5 .25
Typical amount used
for current meters
38
• Center blood droplet over test port hole
and PRESS ALL THE WAY DOWN into
cartridge.
• For best results, try not to smear blood
on test port or fingertip. If this occurs,
wipe finger and gently squeeze an
additional blood droplet.
• During the 90 seconds, you can remove
your finger and KEEP ADDING BLOOD
as long as gentle squeezing forms a
blood droplet.
• The meter will beep and display
when it has enough blood, and your
result will be displayed after a 4-second
countdown.
IMPORTANT: Continue to add blood as many times as needed
within the 90 seconds to achieve a successful test. A countdown
will appear at 60 seconds as an alert that you have one minute
left to complete the test.
Add More Blood Guidance
Push down through test port hole
so blood reaches test strip
Customer Service 1-855-IMI-POGO (464-7646) • www.presspogo.com
Keep adding blood until
enough for result
39