American Megatrends MegaPro User Manual page 15

Step 2 Configure CPU,
Install CPU
Install the CPU in the ZIF socket by performing the following steps.
The CPU sockets are near one edge of the motherboard.
Improper CPU installation can damage the CPU and the
motherboard. You must follow the procedures in this
section exactly as documented. Make sure you wear an
antistatic wristband while installing the CPU. Follow all
Step
1 Lift the lever on the ZIF socket. The empty CPU socket
looks like this.
2 Check for bent pins on the CPU. Gently straighten any
bent pins with pliers. Place the CPU in the middle of the
socket, as shown below. Make sure that pin 1 of the
CPU is aligned with pin 1 of the socket. Make sure you
are properly grounded while handling the CPU.
Chapter 1 Hardware Installation
Continued
Warning
antistatic procedures.
Action
11