Table of Contents
Advertisement
Peripheral Setup,
Continued
Offboard PCI/ISA IDE Card
This option specifies the expansion slot that the offboard PCI or ISA
IDE Controller adapter card is installed in. The Onboard
Primary/Secondary IDE option must be set to Disabled if this option is
set to any value except Disabled.
The settings are Absent, ISA, Slot1, Slot2, Slot3, or Slot4. The Optimal
and Fail–Safe default settings are Absent.
Offboard Primary/Secondary
This option specifies the IDE channel used by the offboard PCI
controller. The settings are Primary, Secondary, or Both. The Optimal
and Fail–Safe default settings are Primary.
Offboard PCI IDE Primary IRQ
Offboard PCI IDE Secondary IRQ
These options specify the PCI interrupt used by the primary and
secondary IDE channels if an offboard IDE controller is installed in the
computer. The settings are Disabled, Hardwired, INTA, INTB, INTC, or
INTD. The Optimal and Fail–Safe default settings are Disabled.
Serial Port1 IRQ
This option specifies the IRQ used by serial port 1. The settings are IRQ
4 or Disabled. The Optimal default setting is IRQ 4. The Fail–Safe
default setting is Disabled.
Serial Port1 Address
This option specifies the base I/O port address for serial port 1. The
settings are 3E8h, 3F8h, or Disabled. The Optimal default setting is
3F8h. The Fail–Safe default setting is not provided.
Chapter 2 WINBIOS Setup
67
Cont'd
Advertisement
Table of Contents
