Power Management Setup - American Megatrends MegaPro User Manual

Power Management Setup

The AMIBIOS Setup options described in this section are selected by
choosing the Power Management Setup icon from the Setup section on
the AMIBIOS Setup main menu.
Standard Power Management
Set this option to Enabled to enable standard power management,
including SMI support. The settings are Enabled, Instant On, or
Disabled. The Optimal and Fail–Safe default settings are Disabled.
Advanced Power Management (APM)
Set this option to Enabled to enable APM. The settings are Enabled or
Disabled. The Optimal and Fail–Safe default settings are Disabled.
Instant–On Timeout (Minute)
This option specifies the length of a period of system inactivity while
the computer is in Full power on state. When this length of time expires,
the computer enters a low power consumption state, but the computer
can return to full power instantly when any system activity occurs. This
option is only available if supported by the computer hardware. The
settings are Disabled, 1 min., 2 min, 3 min., 4 min., 5 min., 6 min, 7 min., 8
min., 9 min., 10 min., 11 min., 12 min., 13 min., 14 min, or 15 min. The
Optimal and Fail–Safe default settings are Disabled.
Auxiliary Power Supply Timeout
This option specifies the power state that the auxiliary power supply
enters when AMIBIOS places it in a power saving state after the
specified period of display inactivity has expired. The settings are
Megakey the power savings state determined by the Megakey
keyboard controller, Standby, Suspend or Disabled. The Optimal and
Fail–Safe default settings are Disabled.
58 MegaPro Dual Pentium Pro PCI ISA Motherboard User's Guide
Cont'd