System Boot Up Num Lock; Weitek Processor; Floppy Drive Seek At Boot; System Boot Up Sequence - American Megatrends Baby Voyager User Manual

Advanced CMOS Setup Options,
W a i t F o r < F 1 > I f A n y E r r o r W a i t F o r < F 1 > I f A n y E r r o r
If enabled, POST error messages are displayed, followed by a
message to press <F1> to continue. If disabled, the system does not
pause after the <F1> message is displayed.
S y s t e m B o o t U p N u m L o c k S y s t e m B o o t U p
The settings are On or Off. This option turns off Num Lock when the
system is powered on, so you can use the arrow keys on both the
numeric keypad and the keyboard. The BIOS default is Num Lock On.
W e i t e k P r o c e s s o r W e i t e k P r o c e s s o r
Specifies that a Weitek numeric processor (WTL4167) is Present or
Absent. This option must be set if a Weitek processor is added to the
system.
F l o p p y D r i v e S e e k A t B o o t F l o p p y D r i v e S e e k A t B o o t
The default for this option is Disabled to allow a fast boot and to
decrease the possibility of damage to the heads. The settings are
Enabled or Disabled.
S y s t e m B o o t U p S e q u e n c e S y s t e m B o o t U p S e q u e n c e
The AMI BIOS normally attempts to boot from floppy drive A: (if
present), and if unsuccessful, it attempts to boot from hard disk C:
This sequence can be switched using this option. If set to C:, A:, the
system attempts to boot from the hard drive C:, and then A:. If the
set to A:, C:, the sequence is reversed.
64
N u m L o c k
Chapter 4 - AMI BIOS Features
Continued