Table of Contents
Advertisement
Section 5
AMI BIOS Password Support
The AMI Hi-Flex BIOS Setup has an optional password feature. The
system can be configured so the end user is required to enter a
password every time the system boots, or whenever the end user
runs Setup. The password function can also be disabled. If disabled,
the prompt does not appear.
Changing a Password
The password check option is enabled in Advanced CMOS Setup
(Page 66) by choosing Always or Setup.
The password (1 - 6 characters) is stored in CMOS RAM.
To change a password, select the Change Password option from the
main Setup screen and press <Enter>. The following prompt appears.
Enter CURRENT Password:
AMI Baby Voyager User's Guide
73
Advertisement
Chapters
Table of Contents
