Wait For <F1> If Any Error; System Boot Up Num Lock; Weitek Processor(S); Floppy Drive Seek At Boot - American Megatrends 43 Series User Manual

ADVANCED CMOS SETUP Options,
Continued
Wait for <F1> If Any Error
Before the system boots, the BIOS executes POST, a series of system diagnostic routines. If POST generates a non-fatal error and the system can still function,
an appropriate error message is displayed followed by:
Press <F1> to continue.
If this option is disabled, the BIOS still displays the appropriate error message, followed by the F1 message, but the end user does not have to press <F1>. The
settings are Enabled or Disabled.

System Boot Up Num Lock

You can turn off the Num Lock key when the system is powered on to allow you to use the arrow keys on both the numeric keypad and the Enhanced Keyboard.
The settings are On or Off. The defaults are On.

Weitek Processor(s)

This option allows you to specify that the Weitek WTK3167 numeric processor is configured. The settings are Present or Absent. You must enable the math
coprocessor in ADVANCED CMOS SETUP before you can use a Weitek 3167.

Floppy Drive Seek At Boot

This option allows you to disable the Seek instruction when booting from a floppy to allow a fast boot and to decrease the possibility of damage to the heads. The
settings are Enabled or Disabled. The defaults are Disabled.