Table of Contents
Advertisement
Advanced Setup,
Extended BIOS RAM Area
Wait for <F1> If Any Error
System Boot Up Num Lock When On, this option turns off the Num
OS/2 Compatible ModeSet this option to Enabled if running OS/2
Floppy Drive Seek At Boot
48
Atlas PCI-II Motherboard User's Guide
Continued
Specify if the top 1 KB of the system
programming area beginning at 639K or 0:300 in the
BIOS area in low memory will be used to store hard
disk information. The settings are
The Optimal and Fail-Safe default settings are
0:300.
AMIBIOS POST runs system diagnostic
tests that can generate a message followed by:
Press <F1> to continue
If this option is enabled, AMIBIOS waits for the end
user to press <F1> before continuing. If this option
is disabled, AMIBIOS continues the boot process
without waiting for <F1> to be pressed. The
settings are Enabled or Disabled. The Optimal and
Fail-Safe default settings are
Lock key when the system is powered on so the end
user can use the arrow keys on both the numeric
keypad and the keyboard.
The settings are On or Off. The Optimal default
setting is Off. The Fail-Safe default setting is
operating system and using more than 64 MB of
system memory on the motherboard. The settings
are Enabled or Disabled. The Optimal and Fail-Safe
default settings are Disabled.
When this option is enabled, AMIBIOS
performs a Seek command on floppy drive A: before
booting the system. The settings are
Disabled. The Optimal default setting is
The Fail-Safe default setting is
DOS 1K or 0:300.
Enabled.
Enabled or
Disabled.
Enabled.
On.
Cont'd
Advertisement
Table of Contents
