Brilix XHPFDPLUS60 User Manual page 19

Actual steps
of electronic expansion
valve.
(1) Press or
temperature/actual steps of electronic expansion valve.
(2) When the unit is switched off, current time is displayed.
5.4 Water temperature setting:
Under current mode, press
5.5 Locking setting
Long press and
4.6 Time setting:
Press to set the time, and press
data.
5.7 TIMER ON SETTING
Press to set the time for HP start to run, and press
again to store the new data.
5.8 TIMER OFF SETTING
Press to set the time for HP stop running, press
again to store the new data. When
to check water-in/water-out/heating and cooling Condenser /back gas/ambient
or to modify the water setting temperature even if it is ON/OFF status.
5 seconds to lock the parameters, Press
or
liglits press
and
to adjust the time After pressed the
or to adjust starting time.then, to press
or to adjust the time of stop running, then, press
to cancel the timer setting.
16
18
for 5 seconds again to unlock
again to store the new