Backing up the configuration
The configuration settings of the IP Encoder can be backed up to a data file. The data file can be
saved to a specified location and used to restore the IP Encoder configuration.
Procedure 3-21 details the steps required to Backup the configuration to a data file.
Procedure 3-21 Backing up the configuration
1 Ensure that the browser is displaying the Front page (if not refer to Procedure 3-11). Select
Backup Config.
2 Select Save from the pop up dialog box.
Note
The Save dialog window may not appear if the browser is configured to stop pop up windows.
3 Select the appropriate location and enter a file name for the configuration file. Then select
Save.
Note
The file name must end in ADIPE4.txt.
Web Configuration
3-27