Configuring A Dome Camera; Procedure 3-9 Defining A Dome Preset Using The Live Video Page; Procedure 3-10 Configuring A Dome Using The Live Video Page - American Dynamics VideoEdge Installation And User Manual

4 Click to move the camera to the preset position.
5 Click to close the Preset menu.
6 Click to close the Primary Camera Control menu.
Defining a Preset

Procedure 3-9 Defining a dome preset using the Live Video page

1 Click to open the Primary Camera Control menu.
2 Position the camera for your preset.
3 Click to display the preset menu.
4 Select a preset number.
5 Click Define Preset
6 When the Replace Preset? message appears, click Yes to program the preset.
The number of available presets is device-dependent.

Configuring a Dome Camera

Depending on the protocol being used cameras can access the dome configuration menu (see the
Intellex Installation and Configuration). Information appearing in the menu depends on the dome
camera.

Procedure 3-10 Configuring a dome using the Live Video page

1 Select the camera. Click
2 Click Configuration Menu
3 Navigate to items in the menu using Pan/Tilt
to modify the values.
4 Accept or reject the modified values.
5 Repeat steps 3 and 4 until the camera is configured.
6 Close the Dome Configuration Menu.
to define a preset at this index.
.
. Select the items using Focus
Web Configuration
. Use Zoom
3-11