Web Configuration
Saving the IP Encoder configuration
If any of the IP Encoder configuration settings have been changed, the IP Encoder configuration
must be saved. Once the configuration has been saved the IP Encoder should be restarted to use
the saved settings.
Procedure 3-19 details the steps required to save the IP Encoder Configuration
Procedure 3-19 Saving the IP Encoder configuration
1 Ensure that the browser is displaying the Main Configuration page. If changes to the
configuration have been made the message "Changes made to configuration have not yet
been permanently saved." will be displayed, as shown in Figure 3-15.
2 Select Save Config.
The IP Encoder configuration will be saved and Figure 3-16, as shown below, will be displayed
with the message "Configuration Saved Successfully.", The IP Encoder will then automatically
restart.
3-24
Figure 3-15 Main Configuration page - Saving Configuration
Installation and User Guide