Appendix C: Optional Equipment - American Dynamics MegaPower 3200 Installation Manual

APPENDIX C: Optional Equipment

The following separate units can connect to the
MegaPower 3200 system for added capabilities.
For specific information, refer to the respective
data sheets.
Keyboards (AD2088, AD2088R, AD2088-1,
AD2088R-1, ADTTE, ADCC1100, ADCC0200P,
ADCC0300P)
Full system keyboards allow for video switching,
pan/tilt control, dome control, auxiliary control,
macro and recorder control (ADCC1100 and
AD2088 only), and system programming. The
keyboards support bi-directional communication
with the ADMPCPU via RS-232 ASCII commands.
Port Expander (AD2081)
Expands one RS-232 port on a system into four
ports for connections to multiple system keyboards.
Manchester Code Generator/Distributor
(AD2091, AD2091-1)
Interfaces with the matrix switcher/controller
system via an AD data line and provides 64 AD
Manchester code outputs for use by receiver/
drivers and suitably-equipped pan/tilts and domes.
Generator/Distributor
(AD2083-02C, AD2083-02C-1 RS-422)
Interfaces with the matrix switcher/controller
system via AD Data Line and provides 16 SEC
RS-422 outputs for use by suitably equipped
domes.
Alarm Interface (AD2096A, AD2096-1)
Supervises up to 64 alarm inputs and provides
RS-232 ASCII alarm commands to the system.
Alarm inputs can be programmed to call any video
input, display any preset, or initiate any auxiliary
action. Up to 16 units can be cascaded on an
RS-232 line.
Switcher Follower (AD2031, AD2031-1)
Activates relays when designated video inputs are
called to designated video outputs. It interfaces
with the matrix switcher/controller system and
provides up to 32 Form A relays via an AD data
line that can be grouped in series and addressed to
a single video output, or in two groups of 16 relays
for two specific video outputs.
AD2010N/P AND AD2020N/P MATRIX SWITCHING BAYS
INSTALLATION GUIDE
AD2032, AD2032-1 Alarm Responder
Activates relays when associated video outputs are
in their alarming condition. Interfaces with matrix
switcher/controllers and provides up to 32 Form A
relays via an AD data line.
Auxiliary Follower (AD2033, AD2033-1)
Activates relays when a specific auxiliary is
triggered either manually or automatically for an
associated video input. Interfaces with matrix
switcher/controllers and provides up to 32 Form A
relays via AD data line.
Four-Channel Character Generator (AD1024CG)
Displays same title, time/date information as an
AD2024VOM or can operate as a standalone unit.
Interfaces with MegaPower 3200 System via an
AD data line.
Recorder Control Devices
The series of recorder control devices allows for
remote control of video recorders via the AD2088
full system keyboard.
• The AD100XA/AD100XA-1A recorder controller,
CPU of the recorder interface network, can
accommodate the entire network, and it enables
programming of the control devices.
• The AD100IR16/AD100IR16-1A IR interface
module controls any recorder that has IR
capability and is supplied with an IR remote
(used to learn the IR commands).
• The AD100RL8/AD100RL8-1 resistive ladder
module controls recorders that can be
controlled via resistive ladder.
• The AD100RS8/AD100RS8-1 RS-232 module
controls RS-232 VCRs and digital recorders.
31 of 64
8200-0421-08, REV. B