Front Panel Leds - BEC 9900VA Quick Start Manual

Front Panel LEDs

LED STATUS
Green
Power
Red
SFP Green
Interchangeable LAN/WAN Ethernet – WAN management & configuration via GUI
Green
Gigabit
LAN1 / EWAN
Orange
Blinking
Off
Green
Ethernet Port
Orange
LAN 2 - 3
Blinking
USB Green
Green
Wireless
Blinking
2.4GHz / 5GHz
Off
Green
WPS Blinking
Off
Phone
Green
Orange
Green
Internet
Red
System is up and ready
System failure
SFP fiber connection is ready
(Default) Ethernet LAN: Connected with a gigabit Ethernet device.
(Configured via GUI) Ethernet WAN: Successfully connected with a
broadband device, e.g. ADSL / VDSL / Cable Modem / FTTH router/modem.
LAN port is connected with a 10/100Mbps Ethernet device
Data is being transmitted/received
No device is connected to the Ethernet port
Transmission speed is at Gigabit speed (1000Mbps)
Transmission speed is at 10/100Mbps
Data is being transmitted/received
Connected with a USB dongle or a hard drive.
Wi-Fi connection is established
Data is being transmitted / received
Wi-Fi connection is turned off
Wireless device(s) is connected successfully via WPS mode
WPS is enabled and trying to establish a WPS connection
WPS is turned off
Successfully registered and ready to use.
Phone is off-hook, in-use.
IP address has received, and traffic is passing thru the device.
IP address request has failed.
DESCRIPTION
Quick Start Guide
2