Front Panel Leds - BEC 8920AC Quick Start Manual

Front Panel LEDs

PWR
(Power)
Gigabit
EWAN /
ETH 5
(Ethernet)
Gigabit
ETH 1~4
(Ethernet)
Wireless
2.4GHz /
5GHz
WPS
DSL1 /
DSL2
INET
(Internet)
LED STATUS
Red
Green
Off
Can be configured to be WAN port for broadband connectivity
Green
Orange
Blinking
Off
Green
Orange
Blinking
Off
Green
Blinking
Off
Green
Blinking
Off
Green
Off
Green
Blinking
Red
Off
DESCRIPTION
System failure or in emergency mode
System is up and ready
Device has no power.
Ethernet LAN : Connected to an Gigabit (1000Mbps)
Ethernet device
Ethernet WAN: Successfully connected with a broadband
connection device
LAN port is connected to an 10/100Mbps Ethernet device
Data being transmitted/received
No device is connected to the Ethernet port
LAN port is connected to an 1000Mbps Ethernet device
LAN port is connected to an 10/100Mbps Ethernet device
Data being transmitted/received
No device is connected to the Ethernet port
Wireless connection established
Data being transmitted / received
Wireless being turned off
Wireless device(s) being connected successfully via WPS
mode
WPS is enabled and trying to establish a WPS connection.
WPS being turned off
Successfully connected to an ADSL DSLAM (Line Synced).
DSL cable is unplugged
IP received and traffic is passing thru the device.
Data being transmitted / received
BEC 8920AC is unable to get a public (WAN) IP address
BEC 8920AC is either in bridged mode or WAN (DSL)
connection is not ready
Quick Start Guide
2