Connecting To The Router - BEC 9900VA Quick Start Manual

Connecting to the Router

The default IP of modem is 192.168.1.254 with subnet 255.255.255.0. Make sure the attached
PC to this router is in the same subnet and has an IP address in the range between 192.168.1.1
~ 192.168.1.253.
Open a web browser and type http://192.168.1.254 in the URL address bar.
URL Address bar: type
http://192.168.1.254
The login prompt will appear. Input the default username and password.
*This username / password may vary by different Internet Service Providers.
Quick Setup Your Router
Use the Quick Start for fast connection setup.
For Wired Broadband Connection (Ethernet WAN) - Before start configuring the
device, make sure you connect the 9900VA with your primary router.
Step 1: Change administration password
Setup a new password for "admin" account for device management. The default password is
"admin". Click Continue to go on to the next step.
*The password may vary by different Internet Service Providers.
New Password: assign a new,
unique password
Confirm Password: re-enter the
new password again
Next Step: click Next
Step 2: Time Zone configuration
Enable and select your Time Zone then click Continue to go on to the next step.
Time Zone: select your
Next Step: click Next
time zone
Quick Start Guide
8