Quick Setup; Connecting To The Router - BEC 8920AC Quick Start Manual

Connecting to the Router

The default IP of modem is 192.168.1.254 with subnet 255.255.255.0. Make sure the attached
PC to this router is in the same subnet and has an IP address in the range between 192.168.1.1
~ 192.168.1.253.
Open a web browser and type http://192.168.1.254 in the URL address bar.
URL Address bar: type
http://192.168.1.254
The login prompt will appear. Input the default username (admin) and password (admin) for
Account type, Administrator.
Quick Setup Your Router
Use the Quick Start for fast connection setup.
Before start configuring your BEC 8920AC, make sure you have the WAN port
connected to phone jacks or with your Internet box or fiber line.
Step 1: WAN Connection Setup
Select the primary network interface for your Internet connection, xDSL/FTTH/3G_4G LTE mode.
Click Continue to the next step
Step 2: Internet Connection Setup
Next to Type, select your Internet connection and fill out all of the appropriate fields.
Step 3: Connection attempts to the Internet
Wait for 10 - 30 seconds for 8920AC to establish an Internet connection.
Step 4: Internet connection established
"Congregations!" message will be shown if the Internet connection is ready to go.
9
BEC 8920AC The Ultimate Residential Gateway w/ 802.11ac
*This username / password may vary by different Internet Service Providers.