Rail M Ounting - SpaceraiL Spacewarp Level 2.1 Instruction Manual

8
In s ta lla tio n o f th e ra ils
Insert the rails into the arm s
(fg. 15+ 16)
Rail joining (fg. 1 7)
A djust and connect the rails.
Insert the rail joining s [R2] into
the holes at the center of the
rails (fg. 1 7)
Inform ation about rail stands
(fg. 18)
T he distance betw een the
arm s shouldbe betw een 8 to
10cm to ensure best stability .
W hen the distance is larg er,
rail stands [A 6] hav e to be
installed
A ttach rail stands in steep
sections and elev ator entry/
ex it points to ensure best
stability of the rails
Steep sections (fg. 19)
Install the arm s in an inclined
position to each other to
create steep sections, so
that the steel balls can run
sm oothly (fg. 19)
[R1] Rail
15
Insert rails into arm
17
18
19
Install the arm s in an inclined position to each other to create steep sections
16
[A 1] Arm
[R2] Rail joining
[R1] Rail
Use rail stands like railw ay ties
T he distance betw een the arm s should be betw een 8 to 10cm .
W hen the distance is larger, rail stands [A 6] hav e to be installed
Assembly of the rails
[R1] Rail
9