Cut The Rail To Size - SpaceraiL LEVEL 1 - CLASSIC Instructions Manual

C

CUT THE RAIL TO SIZE

Step 1: Measure each section and mark the cutting point with a pen.
Step 2: Cut each section according to your measurement making sure to cut
at a 90 angle.
Tip: Cut longer rails slightly larger to be on the safe side. Longer rails can
always be cut a bit shorter. This will help you to avoid having to recut and not
having enough rail.
NOTE:
Illustration of rail lengths is 1:2.84 or
(approximately 35%) of scale.
416mm
420mm
487mm
162mm
174mm
275mm
313mm
26mm
73mm
79mm
Spacerail ©2021