U-Line H-7628 Quick Start Manual page 2

Figure 2
Figure 3
Figure 4
PAGE 2 OF 9
ASSEMBLY CONTINUED
2. Align armrest with holes on bottom of seat cushion.
11
8
3. Align mechanism with holes on bottom of seat
9
9
4. Position back support in slot on bottom of seat
10
Use three 1/4 x 1/" screws (8) with three washers (11)
to attach. Repeat on opposite side. (See Figure 2)
NOTE: Use Allen wrench to tightly secure all
screws.
cushion with tension knob facing the front of seat.
Use four 1/4 x 1/" screws (9) to attach. (See Figure 3)
cushion. Align holes and use three 5/16 x 7/8"
screws (10) to attach back support to mechanism.
(See Figure 4)
0521 IH-7628