Operation; Optional Accessories; Maintenance - Makita JS1000 Instruction Manual

Storing hex wrench
► Fig.4: 1. Hex wrench
Store the hex wrench as shown in the figure when not
in use.

OPERATION

Lubrication
► Fig.5: 1. Pin
Before operation, lubricate the contact point of the
center blade and the pin. To keep good cutting perfor-
mance, also use a cutting lubricant from time to time
during operation.
OPERATION
► Fig.6
Always hold the tool firmly with one hand on housing.
Do not touch the metal part.
Turn the tool on and set front ends of the side blades on
the workpiece. Now simply move the tool forward, keep-
ing the side blades flush with the workpiece surface.
► Fig.7
NOTE:
• When cutting a small portion of the workpiece,
you may have difficulty completing the end of
the cut. In that case, try to cut it again, pulling
the workpiece back slightly.

MAINTENANCE

CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Center blade
• Side blade R
• Side blade L
• Hex wrench
• Thickness gauge
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
5 ENGLISH