Table of Contents
Advertisement
Technical Data
.
DIRECT MOUNT VENT VALVE FOR G3 PUMPS
Maximum working pressure
Pressure Relief Valve
Factory Set Pressure
Reset Pressure
Relief Rate
Solenoid Valve
Flow
Materials of Construction
Wetted materials on all models
Weight
Solenoid Coil
12 Volt DC
24 Volt DC
115 AC*
230 AC*
* AC service coils are internally rectified and can be used in 50 or 60 Cycle (Hz) lines.
NOTE: AC voltage service with transient surges over 1000 volts may require a varistor to be placed in parallel with
the coil.
NOTE: Normally open versions of the vent valve are not recommended for use with oil and a pump that outputs less
than 1.5 cu. in./min.
3A1963G
US
3500 psi
4000 psi + 10%
80% of pressure
0.13 gallons/sec @3000 psi
Up to 5 gpm (18.9 lpm)
zinc plated steel, carbon steel, 6061 T6 aluminum, fluoroelastomer,
polyurethane
37.72 oz.
Resistance (DC) @ 68°F (20°C )
(Ohms)
7.2
28.8
568
2304
Technical Data
Metric
24 MPa, 241 bar
27.6 MPa, 275.8 bar + 10%
0.57 liters/sec @21 MPa. 207 bar
1069.5 grams
Initial Current Draw (Amps)
1.67
0.83
0.17
0.09
7
Advertisement
Table of Contents
