General Information; Manufacturer Identification Data; Indentification Label - Delta WASP 40100 Clay Manual Of Use And Maintenance

1 GENERAL INFORMATION

1.1. Manufacturer identification data

1.2. Indentification label

The printer is CE marked and complies with all relevant provisions:
Machinery Directive 2006/42 / EC, EMC Directive 2014/30 / EU and LVD Directive 2014/35 / EU
EN 55022
EN 55024
EN 60204-1
The marking can be identified by means of an identification plate of the Manufacturer as required by the Machinery
Directive. In case of damage, the Recipient must commission a copy.
1
2
3
4
5
Legend:
1. Model
2. Voltage
3. Maximum power
4. Year of production
5. Serial number
6. Advanced settings
© CSP S.r.l. © CSP S.r.l.
CSP S.r.l.
Viale Zaganelli, 26 - 48024 Massa Lombarda (RA) Italy
Tel. +39 0545 82966
info@3dwasp.com / www.3dwasp.com
Stampante 3D
Modello:
Delta WASP 40100 CLAY
Volts: 230V 50/60Hz
Potenza Max: 180W
Anno di produzione: 2019
Numero di serie:
MADE IN ITALY
General information
IT16060000009355
Advanced settings
Radius
Diagonal Rod
X
Y
Z
O set: x _____ y ______
1
6
7
7