Ball Joints; Stepper Fan; Sliders; Extraordinary Maintenance - Delta WASP 40100 Clay Manual Of Use And Maintenance

Ordinary and extraordinary maintanance

7.2.1. Ball joints

Lubrication
Verify that all the mechanics are moving correctly, especially the ball joints. If they are not working properly
lubricate with grease by using a brush.

7.2.2. Stepper fan

Check that the fan on the extruder is working when the machine is turned on

7.2.3. Sliders

Check plays
Verify that there are no plays between sliders and columns. If any play occurs contact the Manufacturer.

7.3. Extraordinary maintenance

ATTENTION:
The operations of extraordinary maintanance must be performed by Technicians formed by the
Manufacturer only.
Any of these operations not carried out by a Technicians formed by the Manufacturer can cause the
irreversible damage of the machine or of its parts and for this reason it deletes the Warranty
The extraordinary operations are intended as the ones carried out:
With exeptional events as revisions
Sudden stop for the breaking of mechanical or fluid parts
36
36
© CSP S.r.l. © CSP S.r.l.