Operators For Whom The Manual Is Intended; Residual Risks - Delta WASP 40100 Clay Manual Of Use And Maintenance

1.6.2. Operators for whom the manual is intended

The manual is written for:
• The operators involved in using the printer (in the continuation of the manual will be briefly called "users");
• Mechanical maintenance workers: trained and authorized operators for the maintenance of mechanical
parts, pneumatic and oil-hydraulic systems;
• Electrician maintenance technicians: trained and authorized operators for the maintenance of electrical and
/ or electronic parts and systems;
• Qualified technicians (employees of the Manufacturer or authorized service center), special maintenance
staff and operations of a complex and / or particular nature.
ATTENTION:
The user must not perform operations reserved for maintenance personnel or qualified technicians.
The manufacturer is not liable for damages deriving from failure to observe this prohibition.

1.6.3. Residual risks

Residual risk of injury
Do not put hands inside of the printer while it's working.
CAUTION:
Moving parts: possibility of cutting and crushing
ATTENTION:
Watch your head, risk of injury.
Residual risk of electrocution
CAUTION:
It is present tension on the superior part of the printer.
Maintanance / Cleaning
Maintenance / cleaning operations must be carried out by trained and authorized personnel. Operations must be
performed in a safe stop condition, disconnecting the printer from power sources. Refer to chapter 7 "Ordinary
and Extraordinary Maintenance".
© CSP S.r.l. © CSP S.r.l.
1
11
11